Skip to content

IT Infrastructure

Planning & Project Engineering

Good security and IT systems start long before installation. We plan all security and IT trades as one, so that cameras, access control, network and cyber security fit together from the start.

Overview

Concepts, plans and specifications for physical security and IT from a single source.

Planning decides whether cameras cover the right areas, whether there are enough outlets and whether all systems work together securely. Whatever is considered at this stage doesn't need costly retrofitting later. That's why we start with a thorough site survey and clear protection goals.

We combine physical security, cabling, network and cyber security in one concept. This leaves no gaps between the trades, and every networked device is integrated securely from the start. For new builds and refurbishments we work closely with architects, electrical contractors and property managers.

You can engage us for the entire project engineering or just for individual steps, such as a concept or a specification for a tender. We write the documents in vendor-neutral terms so you can compare quotes fairly. If you wish, we also carry out the installation or oversee it through to acceptance.

Your benefits

  • One concept for physical security, IT infrastructure and cyber security
  • Vendor-neutral documents for a fair comparison of quotes
  • Fewer unplanned extras thanks to clear specifications
  • Coordinated interfaces between all trades involved
  • Complete documentation for operation, maintenance and expansion
  • Consulting in German, English and Turkish

Scope of services

What we take care of

  • Needs assessment & site survey

    We clarify your requirements, inspect the site and record existing systems, cable routes and comms rooms.

  • Security & infrastructure concept

    Protection goals, zones and system architecture for physical security, network and cyber security in one coherent concept.

  • Technical plans & schematics

    Floor plans with device positions, cable routes and outlets, plus riser diagrams, network diagrams and rack layouts.

  • Specifications & tenders

    Vendor-neutral specifications with quantities for comparable quotes, with support in comparing bids if required.

  • Project management & coordination

    We coordinate the trades involved, keep an eye on the schedule and are your contact person on site.

  • Acceptance, documentation & training

    Commissioning and acceptance with a formal record, as-built documentation and handover training for your staff.

Typical applications

  • New office and commercial buildings
  • Refurbishment and conversion of existing buildings
  • Residential complexes and property management
  • Tenders by companies and institutions
  • Relocating or expanding sites
  • Logistics and production sites
  • Premium private homes and villas

Technologies & standards

  • EN 50173 / ISO/IEC 11801
  • EN 62676
  • EN 50131
  • KNX
  • ISO/IEC 27001 as a reference
  • NIS2 Directive
  • GDPR
  • CAD plans & riser diagrams
  • Bill of quantities

How we work

From assessment to ongoing operation

Every project follows four clear steps. You have one fixed contact person and always know what happens next.

  1. 01

    Assessment

    We gather your requirements, visit the site and review your existing systems.

  2. 02

    Concept

    You receive a concept with plans, a component list and a transparent quote.

  3. 03

    Implementation

    We install and configure carefully, document everything and keep to the agreed schedule.

  4. 04

    Operation

    We stay with you after handover, with maintenance, updates and monitoring.

Frequently asked questions

When should we involve you in a building project?

As early as possible, ideally at the design stage. Conduits, cable routes, comms rooms and power supply can then be planned properly. Later changes are usually more complex and more expensive.

Do you also write specifications for tenders?

Yes. We describe the required services and characteristics in vendor-neutral terms so that you receive comparable quotes. If you wish, we help you compare the bids received. For public tenders, please clarify the procurement law requirements with your legal advisor.

Can we commission just the planning?

Yes. You can commission us for individual services such as a site survey, a concept or a specification. We can also carry out the installation or provide technical oversight on your side.

Which documents do we receive at the end?

You receive documentation of the as-built state: plans with device positions and cable routes, network and rack overviews, configuration records, and test and acceptance reports. This lets you operate the system securely and expand it later.

Do you take data protection and NIS2 into account in planning?

Yes. We factor in the GDPR and, where your organisation is affected, the requirements of the EU NIS2 Directive. Whether and to what extent NIS2 applies to your organisation should be assessed by a legal advisor for your specific case.

Blog

Articles on this topic

All articles

Let's talk about your project.

Whether it's one building or several sites: we listen, look at the situation on site and propose a solution that fits.